Camera Guide
Bushnell
- Trophy Cam: all models take 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
- 119325C: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
Bresser
- Bresser 360: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
Cuddeback
- No Flash: 1/4″ x 1″ thumbscrew‚ rear tripod mount
- Capture: 1/4″ x 1″ thumbscrew‚ rear tripod mount, remove phillips screw and strap loop to access rear tripod mount
- Excite: 1/4″ x 1″ thumbscrew, rear tripod mount
- Expert: 1/4″ x 1″ thumbscrew, rear tripod mount
- Non Typical: hole in center of unit, mounts to camera bracket with 10 x 24 x 2.5″ bolt
- Attack: 1/4″ x 1″ thumbscrew‚ rear tripod mount
- Ambush: No review available to confirm, however it should mount well with Universal Bracket.
DLC Covert Scouting Cameras 2011 and earlier
- CA 3.0: 1/4″ x 5/8″ thumbscrew‚ insert thumbscrew thru camera bracket and carefully thread into plastic hole located on top of cam.
- Extreme: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
- The Edge: 1/4″ x 5/8″ thumbscrew‚ rear and bottom tripod mount
- Special Ops
- Deuce: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
- HR: 1/4″ x 5/8″ thumbscrew bottom tripod mount
- Assassin: 1/4″ x 5/8″ rear tripod mount
DLC Covert2012 Models
- All 2012 models: 1/4″ x 5/8″ thumbscrew with washer between camera bracket and camera.
Hunten Trail Cams
- C-35, GSC30, GSC20:All need universal bracket
- GSC22-70IR: 1/4″ x 5/8″ thumbscrew‚ rear tripod mount
Little Acorn
- 1/4″ x 5/8″ thumbscrew:Bottom tripod mount
Leaf River
- No review available. May require Universal Bracket.
Leopold Trail Cam
- RCX-1: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
- RCX-2: 1/4″ x 5/8 thumbscrew‚ bottom tripod mount
Minox Trail Cam
- DTC-500: 1/4″ x 5/8″ thumbscrew‚rear tripod mount
Moultrie Trail Cameras
- I-40: 1/4″ x 5/8 thumbscrew‚ bottom tripod mount
- D-50IR: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
- D-55: No tripod mount‚ need Universal Bracket
- D-50: No tripod mount‚ need Universal Bracket
- I-45: 5mm thumbscrew‚ rear tripod mount
- M-45: 5mm thumbscrew‚ rear tripod mount
- L-20: No tripod mount‚ need Universal Bracket
- I-35: No tripod mount‚ need Universal Bracket
- L-50: No tripod mount‚ need Universal Bracket
- Plot Stalker: 5mm or 1/4″ thumbscrew‚ rear tripod mount
- M-80: 5mmx12 thumbscrew‚ rear tripod mount
- M-100: 5mmx12 thumbscrew‚ rear tripod mount
Plotwatcher
- Time lapse Trail Cam: 1/4″ x 5/8″ thumbscrew‚ bottom tripod mount
Predator Trail Cam
- Trail Eye XP: No tripod mount, need Universal Bracket
Premos Trail Cams
- Truth Cams 35, 46, & 60: 1/4″ x 5/8″ thumbscrew, rear tripod mounts
- DPS: 1/4″ x 5/8″ thumbscrew, rear tripod mount
- Super Model: 1/4″ x 5/8″ thumbscrew, rear tripod mount
Recon Trail Cams
- Viper HD: 1/4″ x 5/8″ thumbscrew, rear tripod mount
Reconyx Trail Cams
- HC600, HC500, RC55, & RC60: all 1/4″ x 5/8″ thumbscrew, rear tripod mounts.
Scout Gaurd Trail Cams
- SG-570: Plastic hole located on top of cam will thread with 1/4″ x 5/8″ Thumbscrew, thread carefully.
- SG-560: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- SG-565F: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- SG-580: No tripod mount, need Universal Bracket
Stealth Trail Cams
- Unit: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- Delta: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- Archers Choice: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- Shadow: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- Prowler: No tripod mount, need Universal Bracket
- Sniper: No tripod mount, need Universal Bracket
Spypoint Trail Cams
- All Spypoint Trail Cams: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- IR6, IR8, FLA, IRA, IR35, IRC, Pro X, & Tiny
Tasco Trail Cams
- 119215: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
Uway Trail Cams
- NX50: 1/4″ x 5/8″ thumbscrew, rear tripod mount
- NX80: 1/4″ x 5/8″ thumbscrew, rear tripod mount
- UM562: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
- NT50B: 1/4″ x 5/8″ thumbscrew, rear tripod mount
Wildgame Inovations Trail Cams
- XC6, D-8, IR-8X, IR-5D, N6, W6X, Z4, Z6, N4, N2, W86, S4, S1.3, D6, S2, & IR4: all need Universal Brackets
- IROX: 1/4″ x 5/8″ thumbscrew, bottom tripod mount
Wildview Trail Cams
- X35, Xtreme, & EZ Cam: All need Universal Brackets